M Audio Torq 1.5.2 Serial 22
When you selected the TORQMAX F5 elevator drive, you selected the frequency according to the manufacturer’s instructions, the national electrical code (NFPA70 or CSA22.131) or the DKD6.3 recommendations for installing a floor protector. This drive is safe to use and is subject to two years of experience.
The TORX 6 drive and the TORMIX 6 drive can be mounted either vertically or horizontally. Thanks to this device, installation can be made simple and fast.
For the TORMAX 6 TORK 6 lift, the TORPIX 6 lift and the TORCSST8 lathe/grinder port (40 liter) are supplied in a separate case.
If necessary, the system can be quickly dismantled and a new actuator installed.
Careful assessment of the foundation and heat loss
The optimal location of the drive is determined by its density and the absence of unnecessary obstacles to the passage of low temperatures and the influence of humidity.
The screw fittings of the drive do not require maintenance, as they are lubricated automatically.
Can be used for both vertical and horizontal doors
The TORCH and TORS drives for vertical and horizontal movement are a compact, very convenient and reliable solution for manual multi-speed drive.
TORMEX 6 with a load capacity of 0.3 t are used to automate gates up to 200 m2.
Direct deliveries from one manufacturer
TOREX is a global manufacturer of gate operators, including TORSTEX and TOMTOM operators, which are always of the highest quality, reliability, safety and ease of use. Operators TROCAL, PORT, WOLF and other world famous brands have proven themselves in the field of garage door automation.